Pump & Machinery
Wilden Nomad Grundfos Liquid Controls Corken JEC March Truflo Tuthill Scully

Search Brands

Search Product Types

Search Applications


Air Operated Diaphragm Pumps
parallel imported for best value

Air Operated Diaphragm Pumps

Air Operated Diaphragm Pumps

Centrifugal Pumps
Dosing Pumps

Flow Meters
Registers

Rotary Vane Pumps
Gas Compressors

ANSI Process Pumps
Gas Compressors
Rotary Vane Pumps

Blending Systems
Centrifugal Pumps
Rotary Lobe Pumps

Magnetic Drive Pumps

ANSI Process Pumps
API Process Pumps

Gear Pumps
Rotary Lobe Pumps
Vacuum Pumps & Blowers

Electronic Registers

Tank Protection Systems

Air Operated Diaphragm Pumps

Self Priming Centrifugal Pumps

Level Controllers

LPG Equipment

ANSI Process Pumps
Gas Compressors
Rotary Vane Pumps

Pulsation Dampeners

Peristaltic Pumps

Rotary Vane Pumps
Gas Compressors

Mechanical Seals

Oil Terminal Equipment

Fuel Transfer Pumps
Flow Meters

Tank Fittings

LPG Equipment

Self Priming Centrifugal Pumps

Piston Pumps
Drum Unloaders

Centrifugal Pumps
Dosing Pumps

Blending Systems
Centrifugal Pumps
Rotary Lobe Pumps

Drum Unloading Systems
Piston Pumps

Static Mixers

Centrifugal Pumps

Centrifugal Pumps

Metering Pumps

Flow Meters

Flow Meters

Magnetic Drive Pumps

Piston Pumps

Centrifugal Pumps

Progressive Cavity Pumps

Engine Driven Pumps

Tank Protection Systems

Flexible Impeller Pumps

Electronic Registers

Rotary Mixers

Batch Control Systems
Drum Pumps

Oil Terminal Equipment

ANSI Process Pumps
API Process Pumps

Gear Pumps
Rotary Lobe Pumps
Vacuum Pumps & Blowers

Peristaltic Pumps

Air Operated Diaphragm Pumps
parallel imported for best value

Products

Centrifugal Pumps

Self-Priming Centrifugal Pumps

  • Port Size: 50mm to 300mm
  • Max. Flow Rate: 1300 m3/h
  • Max. Discharge Pressure: 6 bar
  • Max. Fluid Temperature: 80ºC
  • Construction Materials: Cast Iron, Stainless Steel, CD4MCu.
  • Applications: Suitable for Sewage, Solids Handling, Industrial Effluents, Water.

Self Priming Motor Driven Pumps

  • Port Size: 25mm to 100mm
  • Max. Flow Rate: 2600 l/m
  • Max. Discharge Pressure: 78 metres
  • Max. Fluid Temperature: 80ºC
  • Construction Materials: Cast Iron, Zinc Free Bronze, 316 Stainless Steel.
  • Applications: Suitable for waste water, sewage, solids laden liquids, dewatering, firefighting, chemicals and general industrial, marine, agricultural and farm applications.

Self Priming Bare Shaft Pumps

  • Port Size: 25mm to 100mm
  • Max. Flow Rate: 2850 l/m
  • Max. Discharge Pressure: 77 metres
  • Max. Fluid Temperature: 80°C
  • Construction Materials: Cast Iron, Zinc Free Bronze, 316 Stainless Steel.
  • Applications: Suitable for waste water, sewage, solids laden liquids, dewatering, firefighting, chemicals and general industrial, marine, agricultural and farm applications.

Multistage Centrifugal Pumps

  • Port Size: 25mm to 100mm
  • Max. Flow Rate: 1500 l/m
  • Max. Discharge Pressure: 25 bar
  • Max. Fluid Temperature: 120°C
  • Construction Materials: Cast Iron, Stainless Steel, Titanium.
  • Applications: Suitable for liquid transfer in washing systems, cooling and air-conditioning systems, water supply systems, water treatment systems, fire fighting systems, industrial plants and boiler feeding systems.

Hydro 2000 Pressure Booster Systems

Electronically controlled Variable Speed Drive (VSD)

  • Port Size: 50mm to 200mm
  • Max. Flow Rate: 720 m3/h
  • Max. Discharge Pressure: 16 bar
  • Max. Fluid Temperature: 0 to 70°C
  • Construction Materials: Cast Iron, Stainless Steel.
  • Applications: The Grundfos Hydro 2000 is a complete Pressure Boosting System suitable for Water Supply Systems, Irrigation Systems, Industrial Plants, Water Treatment Systems and Fire Fighting Systems.

Stainless Steel Submersible Pumps

  • Port Size: 32mm to 50mm
  • Max. Flow Rate: 34 m3/h
  • Max. Discharge Pressure: 18m
  • Max. Fluid Temperature: 55°C
  • Construction Materials: Stainless Steel.
  • Applications: Suitable for liquid transfer and drainage of wastewater, sludge-containing water, ground water or surface water in places like pits, sumps, ducts, basements, excavations, etc.

Pressure Systems

  • Port Size: 25mm to 32mm
  • Max. Flow Rate: 127 l/m
  • Max. Discharge Pressure: 6 bar
  • Max. Fluid Temperature: 90°C
  • Construction Materials: Stainless Steel
  • Applications: Suitable for water supply for house and garden, irrigation as well as in booster applications.

Borehole Pumps

  • Pump Size: 76mm to 305mm
  • Max. Flow Rate: 470 m3/hr
  • Max. Discharge Pressure: 67 bar
  • Max. Fluid Temperature: 60°C
  • Construction Materials: Stainless Steel
  • Applications: Pumping from deep wells/ boreholes, pumping from open tanks, pressure boosting.

Circulator Pumps

  • Port Size: 40mm to 100mm
  • Max. Flow Rate: 1120 l/m
  • Max. Discharge Pressure: 10 bar
  • Max. Fluid Temperature: 120ºC
  • Construction Materials: Cast Iron, Bronze.
  • Applications: Suitable for circulation of hot or cold water, domestic hot water service systems or cooling and air conditioning systems, solar heating systems.

Stainless Steel Submersible Pumps

  • Port Size: 32mm to 50mm
  • Max. Flow Rate: 34 m3/h
  • Max. Discharge Pressure: 18m
  • Max. Fluid Temperature: 55°C
  • Construction Materials: Stainless Steel.
  • Applications: Suitable for liquid transfer and drainage of wastewater, sludge-containing water, ground water or surface water in places like pits, sumps, ducts, basements, excavations, etc.

Cast Iron Submersible Pumps

  • Port Size: 50mm to 150mm Discharge
  • Max. Flow Rate: 250m3/h
  • Max. Discharge Pressure: 42m
  • Max. Fluid Temperature: 40°C
  • Construction Materials: Cast Iron.
  • Applications: Models are available that are suitable for drainage and surface water, ground water, industrial process water with or without solids and fibres.

Sanitary Centrifugal Pumps

JEC sanitary centrifugal pumps perform at a high efficiency level which gives the benefit of low energy consumption. This is achieved by the spiral shaped casing and a double curved impeller, which reduces friction and turbulence and increases suction capacity (low net positive suction head). Despite the higher performance level, fluids are handled gently compared with normal centrifugal pumps, thereby safeguarding product integrity. The pumps operate at a low noise level which allows safer and more comfortable manufacturing conditions. 

  • Port Size: 40mm to 65mm
  • Max. Flow Rate: 1400 l/m
  • Max. Discharge Pressure: 10 bar
  • Max. Fluid Temperature: 140°C
  • Construction Materials: Stainless Steel.
  • Applications: Suitable for dairies, food, soft drink, pharmaceutical, brewery and water treatment.

Sanitary Self Priming Centrifugal Pumps

JEC sanitary self-priming side-channel centrifugal pumps are well suited to pump fluids containing varying amounts of air or gas, which cannot be pumped by a normal centrifugal pump. One of their many applications is using them as return pumps in CIP (clean in place) cleaning systems. Innovative design features minimise noise levels well below the level normally characteristic of this type of pump. 

  • Port Size: 40mm to 65mm
  • Max. Flow Rate: 800 l/m
  • Max. Discharge Pressure: 4 bar
  • Max. Fluid Temperature: 140°C
  • Construction Materials: Stainless Steel.
  • Applications: Suitable for dairies, food, soft drink, pharmaceutical, brewery and water treatment.

Sanitary WFI Centrifugal Pumps

JEC sanitary WFI centrifugal pumps are ideal for high purity, pyrogen-free fluid for pharmaceutical process and deionized water. They perform at the same high efficiency levels as the other JEC centrifugal pumps.

  • Port Size: 40mm to 65mm
  • Max. Flow Rate: 1650 l/m
  • Max. Discharge Pressure: 10 bar
  • Max. Fluid Temperature: 140°C
  • Construction Materials: Stainless Steel.
  • Applications: Suitable for high purity, pyrogen-free fluid for pharmaceutical process and deionized water requiring GMP and FDA standards.

End Suction Centrifugal Pump

  • Port Size: 32mm to 250mm
  • Max. Flow Rate: 340 l/s
  • Max. Discharge Pressure: 16 bar
  • Max. Fluid Temperature: 95°C
  • Construction Materials: Cast Iron.
  • Applications: Suitable for handling water and similar liquids, mainly used in water supply, air conditioning, irrigation, pressure boosting, heating and ventilating, industrial.

Multistage High-Pressure Centrifugal Pump

  • Port Size: 32mm to 150mm
  • Max. Flow Rate: 236 l/s
  • Max. Discharge Pressure: 63 bar
  • Max. Fluid Temperature: 200ºC
  • Construction Materials: Cast Iron. Hydraulic elements: Bronze, Cast Steel, Alloyed Cast Steel.
  • Applications: Suitable for general water supply, pressure boosting, drinking water supply, irrigation, heating, boiler feed water, washing systems, fire-fighting systems, lubricants, fuels, solvents.

Submersible Pumps

  • Port Size: 50mm to 200mm
  • Max. Flow Rate: 300 l/s
  • Max. Discharge Pressure: 65 metres
  • Construction Materials: Hard Iron, Stainless Steel, 28% Hard Chrome.
  • Applications: Suitable for steel mills, refineries, chemical plants, mines, pulp & paper plants, power plants and other industries with slurry pumps.

Magnetic Drive Pumps

  • Port Size: 6mm to 50mm
  • Max. Flow Rate: 680 l/m
  • Max. Discharge Pressure: 5 bar
  • Max. Fluid Temperature: 87°C
  • Construction Materials: Polypropylene, PVDF.
  • Applications: Suitable for acid and caustic chemicals, waste water treatment plants, strong chromic or sulfuric acid solutions computer cooling, film processors, photo solution recirculation, marine air conditioners and refrigerators, slush drink machines.

Self-Priming Centrifugal Pumps

  • Port Size: 40mm to 100mm
  • Max. Flow Rate: 3300 l/m
  • Max. Discharge Pressure: 70 m
  • Construction Materials: Cast Iron, Bronze, Aluminium, Stainless Steel.
  • Applications: Suitable for construction, dewatering, mining and general industry.

Centrifugal Hot Oil Pumps

  • Port Size: 32mm to 65mm
  • Max. Flow Rate: 2200 l/m
  • Max. Discharge Pressure: 58 m
  • Max. Fluid Temperature: 340°C
  • Construction Materials: Ductile Iron.
  • Applications: Suitable for plastics, chemicals, food and processing industries which require pumping of high temperature fluids.

Portable Engine Driven Self-Priming Pumps

  • Port Size: 25mm to 150mm
  • Max. Flow Rate: 4000 l/m
  • Max. Discharge Pressure: 115 m
  • Max. Fluid Temperature: 80°C
  • Construction Materials: Aluminium, Cast Iron.
  • Applications: Suitable for dewatering, construction, fire-fighting, trash, fuel, mining and marine.

Drum & Container Pumps

  • Port Size: 22mm or 25mm barb
  • Max. Flow Rate: 132 l/m
  • Max. Discharge Pressure: 22m
  • Max. Fluid Temperature: 90°C
  • Construction Materials: Stainless Steel, CPVC, PVDF and Polypropylene.
  • Applications: These pumps are commonly used in a variety of industries due to their chemical resistance and durability. The stainless steel pumps are typically used in applications involving solvent based flammable liquids as well as the food and beverage industries.

ANSI Process Pumps - End Suction

Truflo's DAP series of pumps are built to the ANSI B73.1M specifications to accommodate the very corrosive and erosive conditions of the chemical process industry. The DAP's durability, easy maintenance, and excellent interchangeability make it a great solution for process industry applications. 25 sizes are available.

  • Port Size: 25mm to 200mm
  • Max. Flow Rate: 21,000 l/m
  • Max. Discharge Pressure: 20 bar
  • Max. Fluid Temperature: 370ºC
  • Construction Materials: Ductile Iron, WCB (cast steel) Stainless Steel, CF8M, CN7M, CD4MCu, Hastelloy B, C & TI.
  • Applications: Suitable for waste treatment, water treatment, food processing, chemical processing, pulp and paper, oil and gas, breweries, power generation, steel.

ANSI Process Pumps - Self Priming

Truflo's DSP Series of self-priming pumps are built to the ANSI B73.1M specifications with 8 sizes available. The DSP series is Interchangeable with the DAP series, except for the casing.

  • Port Size: 25mm to 150mm
  • Max. Flow Rate: 4660 l/m
  • Max. Suction Lift: 6 metres
  • Max. Fluid Temperature: 370°C
  • Construction Materials: Ductile Iron, WCB, CD4MCu, Stainless Steel, Hastelloy B & C.
  • Applications: Mill sump service, wastewater pond service w/portable design, unloading service, dikes and containment areas, bulk tank farms top unloading, manhole pumpage systems.

ANSI Process Pumps - Magnetic Drive

Truflo's range of magnetic drive pumps were designed to eliminate the leakage problems associated with centrifugal pumps with mechanical seals. They conform to ANSI dimensions, allowing customers to simply change ANSI pumps without any correction of piping systems or foundations. The customer may also select from 7 sizes in a variety of materials ranging from CF8 to Hastelloy C.

API Process Pumps

Truflo's API 610 10th Edition Process Pumps are available in 27 sizes. Features include enclosed impeller investment casting and excellent interchangeability.

The API 685 Magnetic Drive Pumps are available in a broad range of sizes and materials and have strong rare earth Sm2 Co17 magnets as standard.

Print Page