Applications

Water Supply

Carver Pump Ltd RS Multistage,Ring Section Pump

Multistage, Ring Section Pump

Our process duty, horizontal ring section multistage pump. Designed for moderate to high-pressure pumping, the RS is available in seven basic sizes with overall performance to 2,600 HP.

Carver Pump Ltd RS Multistage,Ring Section Pump

For Pressures to 1,500 PSI

The RS is offered with Class 300 ANSI R.F. inlet flanges and Class 600 or 900 ANSI R.F. discharge flanges, depending on the pressures and number of stages involved. Hydraulic performance extends to 2,000 GPM and 3,400 ft. TDH, making it ideally suited for the most demanding industrial and process applications.

The RS design incorporates a product-lubricated, advanced composite material, sleeve-type radial bearing at the outboard (discharge) end. The thrust bearings are two matched angular contact ball bearings located at the inboard (suction) end of the pump. An optional outboard mechanical seal with an inboard radial ball bearing is also available. The RS has oil-lubricated ball bearings, which can be water cooled. Larger units can also be fan cooled.

The available materials of construction, from ductile iron to duplex stainless steel, offer combinations suitable for all applications from general water services to light abrasives and corrosive applications. Our proprietary advanced composite material, available for wear rings and interstage bushings, offers high-temperature performance, and exceptional resistance to wear and corrosion.

Aussie QP Engine Driven Trash / Fire Pumps

Heavy Duty fully transportable engine driven pumps for a wide range of applications. QP Aussie pumps are designed for local conditions and the range is extensive enough to cover applications.

Fire Fighting Pumps - Designed to out-perform and out-feature all other portable firefighting pumps, the Aussie Fire Chief is the flagship of the Aussie series. The range includes 2” and 3” fire fighting pumps delivers flows to 510 lpm (litres per minute) and heads to 98 metres.

Trash Pumps - Rugged trash pumps in 2”, 3” and 4” with flows to 1800 lpm, heads to 27 metres and suction lift to 7.6 metres. The pumps feature a big front mounted 'cleanout' port and high SG, cast iron, non clog style, open impeller and volute system designed to pump solids in suspension and resist wear.

Transfer Pumps - Aussie gushers (transfer pumps) are available in a range of sizes from 2” to a massive 6″ inlet/outlet. Designed to be ultra reliable, these pumps have applications in the transfer of high volumes of liquid at relatively low pressures. Flows of up to 2900 lpm, (QP602) with heads of up to 33 metres.

Aussie QP Engine Driven Trash / Fire Pumps
  • Construction site dewatering
  • Waste water handling
  • Effluent pump out
  • Livestock waste water disposal
  • Solid laden mine waste pump out
  • Fire fighting pumps, mop up & fire protection
  • High pressure water transfer
  • Spray irrigation
  • Diesel fuel transfer
  • High pressure spraying
  • Boom spraying
  • Wash down
  • High volume water transfer
  • Fast fill tanker applications
  • Flood irrigation
  • Construction site dewatering

Standard Metering Pumps

Standard Metering Pumps are engineered to safely measure and dispense preset batches of product from drums and tanks. The unique design eliminates the need for scales and pails as product can be metered directly out of your source vessel. Available in both Industrial and Sanitary configurations.

Standard Metering Pumps

Engineered to control, measure and dispense preset volumes of liquid from drums, IBC’s, plating tanks or any large storage vessel. The air systems are ideal for high frequency, continuous duty applications. The BCS can be used in an industry where batching, chemical packaging or dilution is required to be accurate and efficient. Simply dial in the desired volume, press ENTER and the BCS delivers a preset volume of liquid virtually hands-free.

Applications

  • Chemical Packaging
  • Water Treatment Chemicals
  • Chemistry For Plating Tanks
  • Chemical Delivery

Features

  • Turbine Paddle Wheel Design
  • Measures: Gallons, Liters, Cubic Meters
  • Resettable Totalizer
  • User Friendly “In Field” Calibration
  • 7 Pre-Set Batches
  • PP & PVDF Materials of Construction
  • Relay Output Signal

Resources
No items found.
March-Hydronic Pumps

March Manufacturing began in 1954 as a job shop performing precision machining for the aircraft industry.  In 1955, March developed its first pump for removing cooling coil condensation.  Our first magnetic drive pump came out in 1962.  In the late 60’s, March ceased operating in the aircraft industry to concentrate on pumps.

Originally located in Skokie, IL, a suburb of Chicago, March moved in 1968 to Glenview, IL to a larger building to better accomodate the increasing demand for sealless pumps.

The company was founded by William Zimmermann.  Since the beginning, March has been managed by the Zimmermann family, and continues today.

March-Hydronic Pumps

Centrifugal Sealless Magnetic Drive Pumps. Flows from 0 to 200GPM. Heads from 0 160 ft. AC, DC & Air Motors. Fractional to 10HP.

Resources
No items found.
Macnaught Positive Displacement Flow Meters

Macnaught Pty Ltd is a leading designer and manufacturer of quality lubrication and fluid transfer equipment into markets such as agriculture, automotive, mining, aviation, industrial and marine. Macnaught is also globally renowned for the manufacture of high quality, oval-gear, positive displacement flowmeters that are known for their reliability, durability and overall design excellence.


Macnaught Pty Ltd, a privately owned company established in 1948, has been designing and manufacturing premium quality fluid measurement, fluid transfer and lubrication equipment for the agricultural, automotive, industrial, mining and transport industries across the globe for over six decades. 

Leaders in our field, we design and manufacture world-class products with a commitment to excellence as one of our main goals. 

We maintain our leading position in the market through strategic distributorships, innovative design, technical expertise and dedicated people. 

Macnaught continues to lead the market by providing its strategic partners with superior product options and quality service to ensure ongoing loyalty. We value the relationships we maintain in the industry and are committed to ensuring we continue to add value to the businesses we serve.

Through enhanced R&D, manufacturing, warehousing, sourcing and distribution capabilities, as well as the ongoing design and development of new products, Macnaught is well positioned for substantial growth and maintaining our leading position in the market.

Macnaught's mission is to always exceed industry standards with its products and services.

Macnaught Positive Displacement Flow Meters
  • Port Size: 6mm to 80mm
  • Max. Flow Rate: 733 l/m
  • Max. Discharge Pressure: 55 bar
  • Max. Fluid Temperature: 80°C
  • Construction Materials: Aluminium, Stainless Steel, Bronze, PPS.
  • Applications: Suitable for alcoholic spirits, sauces, fruit juice, milk, water, chemicals, detergents, oils, fuel, paints.

Resources
No items found.
Blacoh Sentry Sanitary Plastic Pulsation Dampeners

Any type of fluid pump such as Air Operated Double Diaphragm, Metering, Hose, or Centrifugal pump will ultimately create uneven pulses in your system just due to its fluctuating nature.  However, over time this will quickly wear out the components of your pump as well as the overall system, often leading to sudden cracks in the pump or damage to the equipment.                    

A pulsation dampener is designed to absorb and give pressure when needed in order to smooth out the flow and reduce up to 99% of pulsation and shock in the system. Don’t wait until it’s too late; protect your system from the beginning.  Learn more about dampeners for any application:

Blacoh Sentry Sanitary Plastic Pulsation Dampeners

SENTRY FEATURES:                          

 

2. Simple, reliable design and quick installation

 3. Easy in-line maintenance

 4.  Pressure ranges up to 10,000 psi (689.4 bar) available from stock   

5.  Temperature ranges from -60°F to +400°F (-51°C to +205°C) available

 6.  Custom models, larger sizes and higher pressure ratings available on request. Contact Pump&Machinery for more information.

 7.   Bodies available in a full range of chemically resistant materials  

8.   Bladders available for even the most corrosive applications                                                                     

*

                                                           

*

                                                                                                                                              

(optional)

                                                                                                                                          

*

                                                                                                                                           

*

                                    .                                                                                                              

*

                                   

*

                                   

Resources
No items found.
Blacoh Sentry Metal Pulsation Dampeners

When it comes to dampeners for AODD pumps, you don't have to sacrifice quality for price. Backed by the name you know and trust, our new AODDampener is a market-responsive quality product that improves the performance of your system, reduces water hammer and the common shaking of pipes caused by AODD pumps.

With its universal materials: 316 Stainless Steel and PTFE backed diaphragm, these units will cover almost all fluid applications and can be easily used in a full range of system materials from plastics to metals.

Blacoh Sentry Metal Pulsation Dampeners
  • Max. Capacity: 378 litres
  • Max. Discharge Pressure: 276 bar
  • Max. Fluid Temperature: 204ºC
  • Construction Materials: Aluminium, Carbon Steel, Stainless Steel, Alloy 20, Hast C.
  • Applications: Suitable for Chemical Process, Paint & Coating, Pulp, Paper & Textile, Food & Beverage, Gas, Oil & Petrochemical, Pharmectuical, Water Treatment.
Resources
No items found.
Blacoh Sentry Sanitary Metal Dampeners

SANITARY PULSATION DAMPENERS

                               

FDA compliant materials and easy to clean for sanitary or food applications.

                           

                                 Designed for sanitary applications in chemical, industrial, water treatment, pharmaceutical and food/beverage industries,the Blacoh sanitary line of pulsation dampeners and surge suppressors feature specialized stainless steel bodies and tri-clamp fitting   Blacoh’s pulsation dampeners can remove up to 99% of pulsation and vibration, enhancing all-around performance and reliability of fluid flow and protect the system from costly maintenance and repair. Reduce pulsation, improve laminar flow, mitigate water hammer, shaking pipes,splashing, enhance pump performance and flow meter measurement by using one of these units. FDA compliant materials available, including polished and bead blasted 316L stainless steel surfaces. Tri-clamp inlets, optional T-handles, and autoclave safe wetted components provide for easy cleaning.

Blacoh Sentry Sanitary Metal Dampeners

Features:

1.Maximum Pressure: 1,000 psi (68.9 bar)

2. Capacity : 4cu in-5 gallon (.066-19L)

3.Body Materials: 30 RA Polished 316L Stainless Steel,Bead Blasted 316L Stainless Steel

4.Temperature:-20F to 350F (-29 C to 177C)

5.Inlet Port: Tri Clamp Sanitary Fitting

6.Air Control Options:Automatic,Adjustable,Chargeable

7.Bladder Options Food Grade Buna,Food Grade Silicone,food-Grade EPDM,PTFE

Resources
No items found.
Truflo ANSI Process Pumps - End Suction
Truflo's DAP series of pumps are built to the ANSI B73.1M specifications to accommodate the very corrosive and erosive conditions of the chemical process industry. The DAP's durability, easy maintenance, and excellent interchangeability make it a great solution for process industry applications. 25 sizes are available.
Truflo ANSI Process Pumps - End Suction
  • Port Size: 25mm to 200mm
  • Max. Flow Rate: 21,000 l/m
  • Max. Discharge Pressure: 20 bar
  • Max. Fluid Temperature: 370ºC
  • Construction Materials: Ductile Iron, WCB (cast steel) Stainless Steel, CF8M, CN7M, CD4MCu, Hastelloy B, C & TI.
  • Applications: Suitable for waste treatment, water treatment, food processing, chemical processing, pulp and paper, oil and gas, breweries, power generation, steel.
Resources
No items found.
Grundfos Multistage Centrifugal Pumps

The Grundfos CR vertical, multistage, centrifugal in-line pump family works for water supply, water treatment and almost any industrial solution – including those for high-pressure, hot, dangerous, flammable and aggressive liquids.

Now, the range has been upgraded with a new, more robust generation of CR pumps (CR 95, CR 125 and CR 155), offering an optimised hydraulic design for world-class energy efficiency.

Thanks to a small footprint, the pumps are also easier and less costly to install than comparable pumps.

The new CR pumps have been developed using simulation-driven design to perfect every single component and have been field-tested around the world, so you can install and operate the range with total confidence.

The CMB is the horizontal alternative

Grundfos Multistage Centrifugal Pumps


    Sizes : 13-From 1-150 (Basic pump range)
    Head max : 50 bar
    Flow Max : 184 m/h
    Temp range:-40 to 180 C
    Motor Range from 0.37 to 75 kW
    Material versions: CR,CRI,CRN, and CRT






Resources
No items found.
KSB Multistage High-Pressure Centrifugal Pump

High Pressure Pumps: Multistage Horizontal High-Pressure Centrifugal Pump.

KSB Multistage High-Pressure Centrifugal Pump

▪ Reliable: product-lubricated plain bearings made of tungsten carbide, cast pump foot, torsion-resistant pump shroud and confined O-rings ▪ Long service life: corrosion-resistant hydraulic components made of stainless steel ▪ Easy to service: can be fitted with any standardised mechanical seal (to EN 12756) ▪ Easy to install underneath other machinery due to horizontal installation

Resources
No items found.
Grundfos Hydro 2000 Pressure Booster Systems

The Grundfos Hydro MPC booster systems are made to the very highest standards. Thanks to the CU 352 controller, they handle even the most difficult boosting jobs with ease and accuracy.
All components have been combined with focus on quality and efficiency. The Grundfos Hydro MPC booster systems are designed to last: sturdy, compact units with easy access to all service parts. Grundfos Hydro MPC booster systems can be used wherever additional pressure is required. Each booster model has been designed to meet specific customer demands for capacity and control.

The intelligent cascade control ensures that the optimum number of pumps required to meet the demand runs at any time. Together with the CR with IE3 motors, this makes the Hydro MPC the most energy-efficient solution for maintaining a constant pressure during changing flow demands.

Grundfos Hydro 2000 Pressure Booster Systems
  • Reliable highly efficient
  • Highly efficient
  • Service-friendly
  • Space-saving
  • Easy to commission
  • Perfectly adapting to the flow
  • Low-flow detection
  • Application-optimised software
  • BUS and Ethernet communication option
  • Large, clear display
  • Menus in plain text
  • Log function.

Resources
No items found.
Grundfos Pressure Systems

A pressure boosting system is designed to increase low pressure in a water system in order to achieve sufficient water flow and pressure to consumers.

Pressure boosting systems generally consist of one or more pumps which are installed in a booster system to increase the pressure in a system to a certain point independent of flow and inlet pressure.
 
System configuration
Pressure boosting systems are available in various system configurations, each offering different advantages and characteristics such as comfort level, initial investment cost, running costs, flexibility and supply assurance.
 
Examples of pressure boosting configurations:

  • Direct boosting systems: A system where a booster set connected directly to the water mains serves the whole building or only the upper parts of it.
  • Zone divided systems. Here, a number of boosters connected to the water mains or a common break tank serve their own pressure zone.  
  • Roof top tank systems. Here, a booster fills up a roof tank from where the water uses gravity to run to the consumer. This system often has a separate booster set serving the upper floors where the pressure is too low due to insufficient geometric height.
  • Series connected system with intermediate break tanks. Here, every booster serves its own pressure zone in a building, drawing from its own break tank which is located on a separate floor. 
  • Series connected system without intermediate break tanks. Here, the boosters are connected directly in series.  

 
 
Variable Frequency Drive (VFD) controlled systems
VFD controlled systems can deliver the exact needed amount of water thus ensuring that only the needed energy is consumed. These systems also have the advantage that the set point can be altered according to the flow, ensuring that the energy loss due to resistance in pipes is reduced. So even though the initial investment in such a system is higher than in a non-VFD system, the low running cost, the high comfort level and the flexibility of the system often justify the investment. 

Grundfos Pressure Systems

The Grundfos Hydro MPC booster systems are made to the very highest standards. Thanks to the CU 352 controller, they handle even the most difficult boosting jobs with ease and accuracy.
All components have been combined with focus on quality and efficiency. The Grundfos Hydro MPC booster systems are designed to last: sturdy, compact units with easy access to all service parts. Grundfos Hydro MPC booster systems can be used wherever additional pressure is required. Each booster model has been designed to meet specific customer demands for capacity and control.

The intelligent cascade control ensures that the optimum number of pumps required to meet the demand runs at any time. Together with the CR with IE3 motors, this makes the Hydro MPC the most energy-efficient solution for maintaining a constant pressure during changing flow demands.

Applications

  • Schools
  • Hotels
  • Blocks of flats
  • Irrigation systems
  • Industry
  • Municipal supply systems.

Features and benefits

  • Reliable highly efficient
  • Highly efficient
  • Service-friendly
  • Space-saving
  • Easy to commission
  • Perfectly adapting to the flow
  • Low-flow detection
  • Application-optimised software
  • BUS and Ethernet communication option
  • Large, clear display
  • Menus in plain text
  • Log function.

Resources
No items found.
Grundfos Circulator Pumps

Grundfos circulators are available in a wide range of materials and configurations to meet your application needs. They are suitable for heating, cooling and hot water recirculation in residential and commercial buildings. 

Grundfos offers a full line of maintenance-free circulators for moving hot water, from the boiler to heating devices. Energy-efficient options feature a permanent magnet motor capable of saving up to 80 percent of energy consumption when compared with conventional circulators.

Available for both new home construction, as well as retrofit projects, Grundfos hot water recirculation solutions eliminate the wait for hot water at showerheads and sink taps, preventing thousands of gallons of water from flowing down the drain as it warms.

Grundfos Circulator Pumps

UPS pumps constitute a complete range of 3-speed circulator pumps, available both in 50 and 60 Hz.

The pumps can be used in both open and closed systems. UPS pumps are of the canned-rotor type, i.e. pump and motor form an integral unit without a shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid.

Applications

UPS pumps are designed for circulation of liquids in heating and air-conditioning systems. Pumps with bronze or stainless steel housings are also suitable for use in hot-water service systems. Examples of typical applications are:

  • One- and two-pipe heating systems
  • Main pumps
  • Zone pumps
  • Boiler shunt pumps
  • Pumps for heating surfaces
  • Calorifiers
  • Underfloor heating systems
  • Solar heating systems
  • Heat pump systems
  • Geothermal heating systems
  • Heat recovery systems
  • Two-pipe air-conditioning systems
  • Pumps for refrigeration units.

Features and benefits

  • Maintenance-free
  • Low noise
  • Low energy
  • Complete range
  • Available with corrosion-resistant stainless steel or bronze pump housing
  • Wide range of accessories.

JEC Sanitary WFI Centrifugal Pumps

JEC sanitary WFI centrifugal pumps are ideal for high purity, pyrogen-free fluid for pharmaceutical process and deionized water. They perform at the same high efficiency levels as the other JEC centrifugal pumps.

The JEC range offers great quality pumps at competitve prices and Pump & Machinery have the expertise to help with selection, repair and servicing.

In all sectors of the beverage, dairy, pharmaceutical and food processing industries, JEC JWP Series pumps have been proven successful by absolute reliability, low energy consumption, perfect CIP clean ability and low noise level. Special feature of the JEC pumps is high efficiency which gives low energy consumption. The basis for this is the double curved impeller and modular design. The design reduces friction and turbulance, and gives a better suction capacity (low NPSH) at the same time as the pumped product is handled very gently.

JEC Sanitary WFI Centrifugal Pumps
  • JEC Centrifugal Pumps JCP series are designed for heavy-duty, high efficiency applications
  • Less downtime and faster maintenance due to front-loading seal
  • Suitable for EHEDG and 3-A, 1935/2004, FDA and ATEX standards
  • Designed for heavy-duty, high efficiency applications
  • High efficiency and low power consumption
  • Totally cleanable and self-draining for CIP and SIP to meet EHEDG and 3-A standards
  • Low NPSH requirement and noise level
  • Faster maintenance, easier cleaning and less downtime due to unique front loading seal design
  • Easy to interchangeable from a single seal to double seal in minutes
  • One sized shaft seal & Optional base mount version
  • Maximum pressure : 145psi(10bar)
  • Maximum capacity : 440GPM(100 ㎥/hr)
  • Ideal for hygienic process in dairies, foods, soft drinks, pharmaceuticals, breweries and water treatments
  • Mirror finish-standard 0.6 ㎛Ra optional 0.4 ㎛Ra (16Ra, 192grit)