Diesel

For Pressures to 1,500 PSI

The RS is offered with Class 300 ANSI R.F. inlet flanges and Class 600 or 900 ANSI R.F. discharge flanges, depending on the pressures and number of stages involved. Hydraulic performance extends to 2,000 GPM and 3,400 ft. TDH, making it ideally suited for the most demanding industrial and process applications.

The RS design incorporates a product-lubricated, advanced composite material, sleeve-type radial bearing at the outboard (discharge) end. The thrust bearings are two matched angular contact ball bearings located at the inboard (suction) end of the pump. An optional outboard mechanical seal with an inboard radial ball bearing is also available. The RS has oil-lubricated ball bearings, which can be water cooled. Larger units can also be fan cooled.

The available materials of construction, from ductile iron to duplex stainless steel, offer combinations suitable for all applications from general water services to light abrasives and corrosive applications. Our proprietary advanced composite material, available for wear rings and interstage bushings, offers high-temperature performance, and exceptional resistance to wear and corrosion.

‍

LCR iQ Features

User Input & Display

• Large 7" high definition, full color video display - High clarity and easy visibility
• Customizable home screen and delivery setup prompts - Streamline driver interface
• Full alpha-numeric keypad and arrow selection keys - Quick, intuitive navigation
• Instant on-board diagnostics and help screens - Quickly troubleshoot & resolve issues to minimize downtime
• Full screen active delivery mode - Largest readable digits in the industry, viewable from up to 100'
• Day/night mode and brightness adjustment - Operator can select preferred viewing mode for conditions
• Customizable printed tickets - Easily tailor ticket formats without software updates
• Transaction history logs store 10,000+ records - No more lost tickets; Easily access and print historical tickets
• Weights & measures historical audit log and event log - Search and download by date range or field
• Large LED back lit keypad - Easy to operate with gloved hands, easy to read in daylight or at night
• Remote control (E-Stop) compatible to third party systems - Seamless retrofit into existing systems
• 3rd party fleet automation connectivity and data management - Seamless retrofit into existing systems
• Toggle flow - Optimizes fuel flow rate without driver intervention in refined fuels delivery systems
• Wireless Printing - Operator can print from hand-held remote printer
• Connectable with hand held devices, etc via wifi and Bluetooth.
• Standard meter mount base - Drop-in retrofit for all conventionally mounted registers
• Panel mount enclosure option - For remote panel mounting of LCR.iQ®
• Preset delivery by volume or weight - Provides highest accuracy of fuel delivery to prevent over-fueling
• 4-Bolt even seal o-ring design - Water-tight, weather-proof seal protects internal components
• Die-cast aluminum housing - Chromate and powder coated for long term corrosion resistance.11 Conduit Ports (1/2" NPT) - To accommodate many I/O and control optionsMulti-point calibration up to 16 points - Maximize accuracy over entire flow range
• Internal telescoping hinges - Eliminates seizing and corrosion of external door hinges
• Serial accessibility to LCP data communication protocol - Compatible with major in-cab/back office systems
• Electronic temperature volume compensation - Available with optional probe and thermowell kit
• Waterproof, corrosion resistant and dust-proof - meets IP66 and UL Type 4X requirements

• CPE ANSI pumps are specifically designed to exceed the strictest energy regulations for all industries as well as the requirements of ANSI/ASME B73.1. With revolutionary hydraulics and high efficiency, they offer the lowest life cycle costs.
• API 610 / ISO 13709 international standard specifies requirements for overhung, between-bearings and vertically-suspended centrifugal pumps used in petroleum, petrochemical and gas industry process services.
• CPT chemical end suction single stage centrifugal pumps are used for demanding industrial applications to ensure process reliability, high efficiency and low operating costs. ANSI / ASME B73.1 standard covers centrifugal pumps of horizontal, end suction single stage, centerline discharge design, including dimensional interchangeability requirements and certain design features to facilitate installation and maintenance.

The 1000 Series is based on the proven internal gear principal and is enhanced in response from our OEM customers for a pump that offers advanced features which make installation easier. These side-ported pumps have the option to bolt SAE/DIN flanges onto them ensuring maximum flexibility on the porting arrangements. Our pump meets your technical requirements and is easily fitted into your system. Our manufacturing expertise and knowledge of applications enable us to provide you with an engineered solution and ensure satisfaction with post-sales service. We pride ourselves on properly servicing you with specification, installation, operation, and troubleshooting.  The pump was originally designed to meet and exceed the exacting requirements of the refrigeration compressor market.

Engineered to control, measure and dispense preset volumes of liquid from drums, IBC’s, plating tanks or any large storage vessel. The air systems are ideal for high frequency, continuous duty applications. The BCS can be used in an industry where batching, chemical packaging or dilution is required to be accurate and efficient. Simply dial in the desired volume, press ENTER and the BCS delivers a preset volume of liquid virtually hands-free.

Applications

• Chemical Packaging
• Water Treatment Chemicals
• Chemistry For Plating Tanks
• Chemical Delivery

Features

• Turbine Paddle Wheel Design
• Measures: Gallons, Liters, Cubic Meters
• Resettable Totalizer
• User Friendly “In Field” Calibration
• 7 Pre-Set Batches
• PP & PVDF Materials of Construction
• Relay Output Signal

‍

Models / Series

• Open Drip-Proof
• TEFC
• Explosion-Proof
• Air | 1/2 hp
• Air | 3/4 hp
• Air | Flange Mount
• TEFC | 3 Phase

‍

Models / Series

• Centrifugal | Polypropylene
• Centrifugal | Stainless Steel
• Centrifugal | CPVC
• Centrifugal | PVDF
• Centrifugal | Aluminum
• Progressive Cavity | Planetary Gear
• Progressive Cavity | Direct Drive

‍

The regenerative turbine pump design is very unique and works on a different principle than PD pumps. The impeller is a rotating, non-contacting, free-wheeling disc which has many small buckets or cells (typically about 60) on its periphery. When liquid enters the suction port it is picked up by the impeller and instantly accelerated around in the narrow hydraulic channel (casing volute) surrounding the cells. Kinetic energy is imparted to the liquid being flung outwards by the centrifugal force from the liquid in the teeth cells, while circulating radially around the channel. 

LEWA is known worldwide as a specialist and market leader in the handling of supercritical fluids and the use of diaphragm metering pumps, packed plunger metering pumps and process pumps.

LEWA pumps provide high metering accuracy and are durable, reliable, safe and highly efficient.

‍

Designed with fewer parts than competitive pumps, Graco’s air operated double diaphragm pumps features our stall-free, low pulsation air valve, which is externally accessible—ensuring rapid changeovers and minimum downtimes.

Graco’s electric double diaphragm pumps (EODD) are ideal for applications that require low pulsation and a smooth flow. Our energy efficient electric drive reduces energy consumption up to 5x compared to traditional air operated diaphragm pumps.

Each pump is ruggedly constructed to resist corrosion and deliver a long, trouble-free product life.

‍

The Graco diaphragm pumps come in a wide range of air operated and electric diaphragm pumps (ATEX models available). You can also choose from a extensive selection of materials to handle numerous applications, including corrosive and abrasive fluid transfer.

Graco's powerful line of piston pumps move extremely difficult materials when others cannot. SaniForce piston pumps have fluid pressures up to 1,200 psi (83 bar) handling even the toughest materials.

Graco’s powerful line of piston pumps move difficult materials when others cannot. Fluid pressures of up to 1,200 psi (83 bar) are ideal for low to medium viscosity materials such as beverages, juices and sauces.

Quick knockdown lowers are made with corrosion resistant stainless steel and feature easy to clean sections, improving overall efficiency.

• Only electric diaphragm pump on the market that will stall under pressure
• Up to 80% more efficient than air operated diaphragm pumps
• Reduce pulsation without the addition of pulsation dampeners
• Patent pending technology allows pump to stall under pressure preventing pump failures from
  clogged lines or closed valves
• Energy efficient electric drive reduces energy consumption up to 80% compared to traditional air
  operated diaphragm pumps
• Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions
• Request a demo and see interactive information at www.graco.com/e-series

‍

‍Features and Benefits:

   
• Effectively dampens up to 70% of discharge pressure pulsation 
   
• Protects against water hammer and associated damage    
   
• Utilises the same standardised wear components as Wilden diaphragm pumps    
   
• Self-adjusting to various system pressures    
   
• Large solids capacity    
   
• Configurable to meet ATEX II 2 GD X requirements

‍