Heavy Duty

As specialists in WARMAN pumps we are also proud to offer the WEIR range of knife gate valves, including the USA made Delta range and more cost effective ISOgate range. The range also includes pneumatic pinch valves, mining quality check vales (non return) and the Autoball AB3 valve.

‍

There are a number of processes within a mine site which require specialised valves designed to handle highly abrasive environments.

Delta Industrial™ knife gate valves are ideal for many of these demanding processes.

Mill circuit

The mill circuit presents a number of issues when selecting a valve. Large particle sizes, high percentages of solids, and high specific gravity make selecting the correct valve critical to achieving the least possible downtime. We can customise our Delta Industrial™ valves to provide optimal performance in any part of the mill circuit. The Delta Industrial™ 15 series and Centre, Block and Bleed (CBB) valves provide outstanding isolation performance, with zero leakage shut-off and no discharge to the nvironment during operation.

Tailings and slurry transport

Tailings consist of ground rock and process effluents that are generated in a mine processing plant. Mechanical and chemical processes are used to extract the desired product from the run of the mine ore and produce a waste stream known as tailings. The pressure in these lines can exceed 50bar (725psi), necessitating engineered valve solutions for safe and reliable operation. We have developed the Delta Industrial™ 60 series valves for such applications, being capable of handling 102bar (1480psi).

‍

‍

‍

Do you need heavy duty equipment capable of continuously pumping everything from corrosive and abrasive to clean and solid contaminated fluids? How about something which is reliable with low energy consumption and maintenance costs? If you thought that’s too good to be true, you’re mistaken. Meet the Warman Q-Series family of axial flow pumps.

Available in a wide range of materials and configurations to suit every situation, Warman® Q-Series pumps offer continuous circulation of fluids across a variety of applications including salt and potash, chemical, pulp and paper, mining, water treatment, biomass and food.

If you want straightforward maintenance, minimal operating costs and long wear life, get in touch with our team of Warman® axial flow pump experts.

‍

Multistage, Ring Section Pump

Our process duty, horizontal ring section multistage pump. Designed for moderate to high-pressure pumping, the RS is available in seven basic sizes with overall performance to 2,600 HP.

‍

Heavy Duty fully transportable engine driven pumps for a wide range of applications. QP Aussie pumps are designed for local conditions and the range is extensive enough to cover applications.

Fire Fighting Pumps - Designed to out-perform and out-feature all other portable firefighting pumps, the Aussie Fire Chief is the flagship of the Aussie series. The range includes 2” and 3” fire fighting pumps delivers flows to 510 lpm (litres per minute) and heads to 98 metres.

Trash Pumps - Rugged trash pumps in 2”, 3” and 4” with flows to 1800 lpm, heads to 27 metres and suction lift to 7.6 metres. The pumps feature a big front mounted 'cleanout' port and high SG, cast iron, non clog style, open impeller and volute system designed to pump solids in suspension and resist wear.

Transfer Pumps - Aussie gushers (transfer pumps) are available in a range of sizes from 2” to a massive 6″ inlet/outlet. Designed to be ultra reliable, these pumps have applications in the transfer of high volumes of liquid at relatively low pressures. Flows of up to 2900 lpm, (QP602) with heads of up to 33 metres.

‍

‍

‍

LEWA is known worldwide as a specialist and market leader in the handling of supercritical fluids and the use of diaphragm metering pumps, packed plunger metering pumps and process pumps.

LEWA pumps provide high metering accuracy and are durable, reliable, safe and highly efficient.

‍

Many food manufacturers are still emptying barrels and drums by hand, this back breaking work is labour intensive and unproductive. Graco container evacuation systems (drum unloaders) solve this problem. They are designed with numerous built-in features to protect foods from contamination. Graco's piston pumps are built with sanitary flanges, quick knockdown connections and a FDA-compliant air motor shroud, making cleaning and sanitization an easy process. The unloading systems are equipped with a pump ram with follower plate and inflatable seal protecting ingredients from external contamination and bacteria, leading to safer operations over dumping and scooping.

Graco seals inflate to conform to the container type and shape, providing evacuation rates up to 99% by cleanly wiping down the container's sides. The inflating seals are capable of accommodating ribs and slightly tapered barrels designs.

Contact Pump & Machinery for more details

An air operated diaphragm pump (also known as AODD pump or membrane pump) is a type of positive displacement pump that uses compressed air as a power source. The compressed air is shifted from one chamber to the other by a linked shaft that allows the chambers to move simultaneously. This back-and-forth motion, forces liquid out of one chamber and into the outlet manifold, while filling the opposite fluid chamber via the inlet manifold. Upon changeover, the fluid section that was filled on the previous shift empties into the outlet manifold and the fills the opposite chamber via the inlet manifold. The rapid changeover allows for reduced pulsation at the outlet.

WETTED COMPONENT OPTIONS

• Acetal
• Kynar
• Polypropylene

CENTER SECTION

• Polypropylene

• Santoprene
• PTFE

DIAPHRAGM OPTIONS

• Supply pump for OEM applications
• Printing ink supply
• Chemical supply for wastewater and sanitary applications
• Plating/surface finishing
• Chemical dosing
• Car wash chemicals
• Laundry chemicals and detergents (hotel/resorts)

‍

Electric-powered hose pumps are ideal for use in industrial fluid transfer and metering applications. Abrasive, corrosive, shear sensitive, and gas-entrapped fluids can easily be pumped or dosed into your application. A broad set of benefits includes long hose life, numerous electric motor options and low operating costs.

Graco's powerful line of piston pumps move extremely difficult materials when other pump cannot. SaniForce piston pumps can offer fluid pressures up to 1,200 psi (83 bar) handling even the toughest materials. Designed for industrial or hygienic applications, Graco has a pump to suit your application.

Wilden’s accessory products offer flexibility and value to your liquid process and expand the application range of Wilden pumps by complimenting the performance and specification of your pump. Wilden electronic controllers automate your Wilden pump for batching, and other electronically controlled dispensing applications and processes. By eliminating pump pulsation we can also create laminar process flow, or control the liquid level within a system or process.

DA GLOBAL features thousands of after-market parts IN STOCK in our California-based, 15,000 sq. ft. facility. We specialize in after-market parts for WILDEN®, WARREN RUPP® and ARO®, among others. Large tooling investments allow us to bring forth hundreds of new parts every 6 months, making NOMAD the undisputed leader in its industry.

Air diaphragm pumps are widely used in a variety of applications due to their versatility. Air operated double diaphragm pumps feature few moving parts, with no motor, base plate or other peripherals required. The design style, coupled with its positive displacement functionality, allows for the transfer of shear sensitive products with self-priming up to 25 feet. Air diaphragm pumps feature low initial investment as well as low replacement costs for wear parts when compared to other pump types.

Atex options are available

‍

The TRANS-FLO gold product line features a rugged anodized aluminum piston-style air valve system, capable of functioning in the harshest compressed air conditions, emphasis on mining, construction and utilitarian applications. The TRANS-FLO GOLD system also features the fewest moving parts in the diaphragm pump business, allowing for ease of maintenance, assembly and disassembly.

‍

We are your first choice for the grinding of dry products!
From A (activated carbon) to Z (zinc) - we offer the right mill for your product.

Our extensive experience and wide range of mills are available for the fine cutting, fine grinding and ultra-fine grinding of dry products of all desired finenesses.

High-performance classifiers for the finest of products, round off our program.

‍

NEMO® Barrel Emptying Pumps suction themselves automatically to the bottom of the barrel or container to achieve almost residue-free emptying in the chemical, pharmaceutical and foods industries. The heart of the Barrel Emptying System is a volumetrically conveying NEMO® Progressing Cavity Pump. When the NEMO® Pump is started, a vacuum is created under the follower plate. This then simultaneously puts slight pressure on the substance in order to guarantee constant suction in the pump.

Features of NEMO® Barrel Emptying Pumps:

• very gentle conveyance
• nearly residual-free emptying
• conveyance also of compacted products
• conveyance of solids

NEMO® Barrel Emptying Pumps offer you:

• conveyance volume in proportion to rotation speed
• constant low-pulsation conveyance
• high efficiency
• low life cycle costs combined with easy serviceability

Everything from a single supplier!
Our broad product portfolio makes it possible for us to design complete dosing systems for you. Take advantage of our many years of experience and know-how.

‍