Industry
The bulk transport industry requires heavy duty reliable pumps, meters, valves, fill control and couplings. Pump & Machinery offer a complete range of pumps, valves, meters and connections for the tanker and bulk liquid transport industry.
Gear pumps are positive displacement pumps, available in a variety of designs, but there are two basic types: external and internal. External gear pumps consists of two identical, interlocking gears supported by separate shafts. Internal gear pumps have two interlocking gears of different sizes with one rotating inside the other.
Typical applications include:
- Petroleum
- Water
- Resins and Polymers
- Fats and Oils
Pump & Machinery offer a wide range of gear pumps from a variety of manufacturers, we stock Tuthill pumps and parts.
The main advantages include:
- Compact and light weight
- Great for a wide range and changeable viscosities
- High efficiency (up to 98%)
- Cost effective
- Very low pulsation
- Limited self priming (seek advise)
- Low or high speed running
- High temperatures - over 300°C
The main disadvantage include:
- Noisy
- Cannot be run dry
- Don't use with abrasive mediums
Our process duty, horizontal ring section multistage pump. Designed for moderate to high-pressure pumping, the RS is available in seven basic sizes with overall performance to 2,600 HP.
The RS is offered with Class 300 ANSI R.F. inlet flanges and Class 600 or 900 ANSI R.F. discharge flanges, depending on the pressures and number of stages involved. Hydraulic performance extends to 2,000 GPM and 3,400 ft. TDH, making it ideally suited for the most demanding industrial and process applications.
The RS design incorporates a product-lubricated, advanced composite material, sleeve-type radial bearing at the outboard (discharge) end. The thrust bearings are two matched angular contact ball bearings located at the inboard (suction) end of the pump. An optional outboard mechanical seal with an inboard radial ball bearing is also available. The RS has oil-lubricated ball bearings, which can be water cooled. Larger units can also be fan cooled.
The available materials of construction, from ductile iron to duplex stainless steel, offer combinations suitable for all applications from general water services to light abrasives and corrosive applications. Our proprietary advanced composite material, available for wear rings and interstage bushings, offers high-temperature performance, and exceptional resistance to wear and corrosion.
The future of electronic registers has arrive, and it is the LC (Liquid Controls) LCR iQ. At the center of the CENTRILOGiQ® platform is the LCR.iQ®, built from the ground up by Liquid Controls' Research & Development team and in close collaboration with customers who will benefit from it! Ease of use, process configurability, and data security were the highest priorities in the design and foundation of the LCR.iQ®.
The LCR iQ replaces the Pump & Machinery Selectronic register which has served the NZ tanker industry well for 40 plus years.
LCR iQ Features
User Input & Display
Heavy Duty fully transportable engine driven pumps for a wide range of applications. QP Aussie pumps are designed for local conditions and the range is extensive enough to cover applications.
Fire Fighting Pumps - Designed to out-perform and out-feature all other portable firefighting pumps, the Aussie Fire Chief is the flagship of the Aussie series. The range includes 2” and 3” fire fighting pumps delivers flows to 510 lpm (litres per minute) and heads to 98 metres.
Trash Pumps - Rugged trash pumps in 2”, 3” and 4” with flows to 1800 lpm, heads to 27 metres and suction lift to 7.6 metres. The pumps feature a big front mounted 'cleanout' port and high SG, cast iron, non clog style, open impeller and volute system designed to pump solids in suspension and resist wear.
Transfer Pumps - Aussie gushers (transfer pumps) are available in a range of sizes from 2” to a massive 6″ inlet/outlet. Designed to be ultra reliable, these pumps have applications in the transfer of high volumes of liquid at relatively low pressures. Flows of up to 2900 lpm, (QP602) with heads of up to 33 metres.
Nomad polypropylene air operated double diaphragm (AODD) pumps offer the following technical advantages:
Since 1977, Tuthill has worked to improve magnetically driven gear pumps by engineering solutions to meet the needs of varying applications and exacting designer specifications. The result is a family of magnetically coupled pumps that have found wide industry acceptance for their versatility and robust standard of build and reliability.
316 Stainless Steel or Hastelloy
Flow rates to 650gph(2460L/hr)
Differential Pressures to 250psi(17.2bar)
System Pressures to 500psi(34.5bar)
Temperatures to 350°F(176°C)
Lubrication & Circulation Pumps
Tuthill lubrication pumps handle a wide range of viscosities and sustain a constant flow at any pressure.
The 1000 Series is based on the proven internal gear principal and is enhanced in response from our OEM customers for a pump that offers advanced features which make installation easier. These side-ported pumps have the option to bolt SAE/DIN flanges onto them ensuring maximum flexibility on the porting arrangements. Our pump meets your technical requirements and is easily fitted into your system. Our manufacturing expertise and knowledge of applications enable us to provide you with an engineered solution and ensure satisfaction with post-sales service. We pride ourselves on properly servicing you with specification, installation, operation, and troubleshooting. The pump was originally designed to meet and exceed the exacting requirements of the refrigeration compressor market.
Sharpe Mixers Clamp Mounted Direct Drive and Gear Drive Portable mixers
Standard Metering Pumps are engineered to safely measure and dispense preset batches of product from drums and tanks. The unique design eliminates the need for scales and pails as product can be metered directly out of your source vessel. Available in both Industrial and Sanitary configurations.
Engineered to control, measure and dispense preset volumes of liquid from drums, IBC’s, plating tanks or any large storage vessel. The air systems are ideal for high frequency, continuous duty applications. The BCS can be used in an industry where batching, chemical packaging or dilution is required to be accurate and efficient. Simply dial in the desired volume, press ENTER and the BCS delivers a preset volume of liquid virtually hands-free.
Standard Pump motors are designed to operate in the most demanding of environments. An extensive line ofExplosion Proof, TEFC, Open Drip-Proof and Air motors provide durability and safety regardless of the environment.
Our complete range of pump tubes provide an ideal solution for applications ranging from corrosive chemicals to light oils. Pump tubes are available in Polypropylene, PVDF, CPVC, Stainless Steeland Aluminum.
Our 3A Sanitary Pumps are a hygienic solution specifically designed for the dairy process industry. The 3A pumps feature over-molded diaphragms and a swivel stand.
Our 3A Sanitary Pumps are a hygienic solution specifically designed for the dairy process industry. The 3A pumps feature over-molded diaphragms and a swivel stand.
Sizes from 40mm to 100mm pumps,Ideal for Poultry,Large Solids, a very versatile pump for the Food Processing Industry.
Blackmer® S Series screw pumps are self-priming, double-ended, positive displacement pumps that offer outstanding performance in the most demanding applications regardless of temperature, viscosity or pressure. The twin and triple screw designs provide complete axial balancing of the rotating screws and their timing technologies eliminate metal-to-metal contact within the pump.
Blackmer S Series pumps are available in four distinct lines, each having multiple model configurations and sizes: twin screw (WTG), twin screw with non-timing gear (NTG), multi-phase twin screw, and triple screw. Other features of Blackmer S Series pumps include compact design, ability to run dry for short periods, high suction lift and constant flow rates despite varying conditions. They are low noise and nearly pulsation-free with little fluid agitation, making them ideal for use with corrosive and non-corrosive, low or high viscosity, and clean or abrasive liquids.
Petrochemicals generate starting products for the manufacture of plastics, pharmaceuticals, colorants, detergents, and other products. The most important operations are the various splitting or cracking processes (e.g. steam cracking, hydrocracking). These processes convert long-chained hydrocarbons (e.g., naphtha) into short-chained ones.
LEWA supports your production plants with effective additive metering, as well as with the conveying and treatment of washing water and sour water.
LEWA offers you specialized solutions for the metering and conveyance of the required chemicals and products. We design pumps and systems to suit your requirements and offer you all-round support for processes such as hydrocracking.
Petrochemicals generate starting products for the manufacture of plastics, pharmaceuticals, colorants, detergents, and other products. The most important operations are the various splitting or cracking processes (e.g. steam cracking, hydrocracking). These processes convert long-chained hydrocarbons (e.g., naphtha) into short-chained ones.
LEWA supports your production plants with effective additive metering, as well as with the conveying and treatment of washing water and sour water.
LEWA offers you specialized solutions for the metering and conveyance of the required chemicals and products. We design pumps and systems to suit your requirements and offer you all-round support for processes such as hydrocracking.
LEWA is known worldwide as a specialist and market leader in the handling of supercritical fluids and the use of diaphragm metering pumps, packed plunger metering pumps and process pumps.
LEWA pumps provide high metering accuracy and are durable, reliable, safe and highly efficient.
The Nikkiso Non-Seal centrifugal canned motor pump has been designed specifically for the chemical industry. There, it is used for metering critical fluids. To do this, the centrifugal pump is designed in accordance with API 685.
