Industrial

As specialists in WARMAN pumps we are also proud to offer the WEIR range of knife gate valves, including the USA made Delta range and more cost effective ISOgate range. The range also includes pneumatic pinch valves, mining quality check vales (non return) and the Autoball AB3 valve.

‍

There are a number of processes within a mine site which require specialised valves designed to handle highly abrasive environments.

Delta Industrial™ knife gate valves are ideal for many of these demanding processes.

Mill circuit

The mill circuit presents a number of issues when selecting a valve. Large particle sizes, high percentages of solids, and high specific gravity make selecting the correct valve critical to achieving the least possible downtime. We can customise our Delta Industrial™ valves to provide optimal performance in any part of the mill circuit. The Delta Industrial™ 15 series and Centre, Block and Bleed (CBB) valves provide outstanding isolation performance, with zero leakage shut-off and no discharge to the nvironment during operation.

Tailings and slurry transport

Tailings consist of ground rock and process effluents that are generated in a mine processing plant. Mechanical and chemical processes are used to extract the desired product from the run of the mine ore and produce a waste stream known as tailings. The pressure in these lines can exceed 50bar (725psi), necessitating engineered valve solutions for safe and reliable operation. We have developed the Delta Industrial™ 60 series valves for such applications, being capable of handling 102bar (1480psi).

‍

‍

‍

Do you need heavy duty equipment capable of continuously pumping everything from corrosive and abrasive to clean and solid contaminated fluids? How about something which is reliable with low energy consumption and maintenance costs? If you thought that’s too good to be true, you’re mistaken. Meet the Warman Q-Series family of axial flow pumps.

Available in a wide range of materials and configurations to suit every situation, Warman® Q-Series pumps offer continuous circulation of fluids across a variety of applications including salt and potash, chemical, pulp and paper, mining, water treatment, biomass and food.

If you want straightforward maintenance, minimal operating costs and long wear life, get in touch with our team of Warman® axial flow pump experts.

‍

Warman Slurry Pumps are the market leaders in pumping abrasion fluids and slurries. Designed to offer high performance, reliability and low total cost of ownership, when you purchase a Warman® slurry pump, you aren’t just getting a heavy-duty product which can handle highly abrasive slurries; you’re gaining access to our global support network of expert service teams, who will work with you to solve your problems and improve your slurry transportation process.

From horizontal and  designed for heavy-duty applications including mill discharge and tailings processing to ‍, there’s a Warman® slurry pump to suit your needs. When you need a slurry pump for mining, chemical or industrial applications, speak to the Pump & Machinery team.

Do you need a horizontal centrifugal slurry pump that can handle a range of heavy duty mill circuit and aggressive wear applications? How about a froth pump which easily processes extremely dense slurries?

Whether you need a high pressure horizontal slurry pump or something suited to everything from flue gas de-sulphurisation to gravel and dredge applications, we can provide the perfect Warman centrifugal slurry pump.

Offering extended wear life, reduced maintenance, outstanding availability and high performance pumping across mining, chemical and industrial applications, get in contact with the friendly Pump & machinery team.

‍

‍

GH

Available as either a frame-mounted (GHF) or close-coupled (GHC) unit, the GH is based on the same product platform as our vertical pumps and shares many of the same parts.

For added simplicity, the entire series is covered by only three bearing frames and comes in whole pump or modular kit form. The GHC is fully compatible with standard, off-the-shelf NEMA JP and JM frame motors, and all models feature a back pull-out design and casings rotatable in 90° increments for different field piping orientations

‍

The API Maxum Series is Carver's offering specifically designed to meet the needs of the Hydrocarbon Processing Industry. Fully compliant with the latest edition API 610 specifications, the API Maxum is a horizontal, end suction - top discharge, centerline mounted unit. Designed for optimum reliability, these units feature rugged construction and state of the art mechanical design features. These units are well suited for applications that include petroleum refining/production/ distribution, petrochemical/chemical processing, boiler circulation/high temperature applications, and general industrial use. A workhorse in the industry, these pumps are designed for years of service, in some of the toughest environments imaginable. Created specifically for the Hydrocarbon Processing Industry, the API Maxum benefits other markets as well. Hydraulic performance extends to over 9,000 GPM and 720 feet of head. Capable of operating up to 400°F without external cooling and 600°F with cooling makes this pump ideal for mid-high temperature applications.

Multistage, Ring Section Pump

Our process duty, horizontal ring section multistage pump. Designed for moderate to high-pressure pumping, the RS is available in seven basic sizes with overall performance to 2,600 HP.

‍

The 855 Series is Carver's offering specifically designed to meet the needs of Filtrate Pump users. Since developed in the late 1950s at the request of a large Original Equipment Manufacturer (OEM) of vacuum filtration equipment, a wide variety of options are now being included as standards into each pump produced. Flange mounting directly to the receiver tank eliminates suction piping/NPSH problems and allows pumping to resume even after short periods of interrupted flow. Capable of operating in vacuum conditions up to 26" Hg, the specially designed semi-open impeller assures pumping from a trickle to full capacity.

Carver filtrate pumps can be used to replace Krogh pumps, which although widespread across the NZ pulp & Paper industry, Krogh have disappeared.

Grundfos offers a wide range of dosing pumps representing state-of-the-art technology.

Digital Dosing solutions (SMART Digital, DME, DDI) set new standards in liquid chemical handling and accuracy. The operator can easily install and set up the pump to discharge exactly the quantity of dosing liquid required for the process in a unique drive- and flow-control management concept. The setting of the pump is displayed in ml/h, l/h or gph, and the operation mode is easily identified by means of icons.

The DMH mechanical hydraulic dosing pump range is the preferred choice for industrial and complex tasks. The DMH range is a series of extremely strong, robust pumps for applications where a substantial dosing range and high-pressure capabilities are required

‍

Heavy Duty fully transportable engine driven pumps for a wide range of applications. QP Aussie pumps are designed for local conditions and the range is extensive enough to cover applications.

Fire Fighting Pumps - Designed to out-perform and out-feature all other portable firefighting pumps, the Aussie Fire Chief is the flagship of the Aussie series. The range includes 2” and 3” fire fighting pumps delivers flows to 510 lpm (litres per minute) and heads to 98 metres.

Trash Pumps - Rugged trash pumps in 2”, 3” and 4” with flows to 1800 lpm, heads to 27 metres and suction lift to 7.6 metres. The pumps feature a big front mounted 'cleanout' port and high SG, cast iron, non clog style, open impeller and volute system designed to pump solids in suspension and resist wear.

Transfer Pumps - Aussie gushers (transfer pumps) are available in a range of sizes from 2” to a massive 6″ inlet/outlet. Designed to be ultra reliable, these pumps have applications in the transfer of high volumes of liquid at relatively low pressures. Flows of up to 2900 lpm, (QP602) with heads of up to 33 metres.

‍

‍

‍

Nomad polypropylene air operated double diaphragm (AODD) pumps offer the following technical advantages:

• Self priming
• Ability to dead head
• High pressure
• Chemical compatibility
• Air powered
• Variable speed
• Easy maintenance
• Hygienic materials available
• Heavy duty
• Reliable

Since 1977, Tuthill has worked to improve magnetically driven gear pumps by engineering solutions to meet the needs of varying applications and exacting designer specifications. The result is a family of magnetically coupled pumps that have found wide industry acceptance for their versatility and robust standard of build and reliability.

Lubrication & Circulation Pumps

Tuthill lubrication pumps handle a wide range of viscosities and sustain a constant flow at any pressure.

Sharpe Mixers Clamp Mounted Direct Drive and Gear Drive Portable mixers

• White powder-coated nosecone.
• Single or dual hyflo impellers.
• Shaft rpm is 1750
• This mixer line has been refined and improved over the years to assure that every component has significant advantages over other mixers on the market.
• From the nearly indestructible white powder-coated finish to the stainless-steel mounting clamp, from the vapor-tight coupling housing to the quality-10 gearing, you can be confident that your Sharpe Mixer will look and operate like new after years of duty.

‍

Standard Metering Pumps are engineered to safely measure and dispense preset batches of product from drums and tanks. The unique design eliminates the need for scales and pails as product can be metered directly out of your source vessel. Available in both Industrial and Sanitary configurations.

Standard Pump motors are designed to operate in the most demanding of environments. An extensive line ofExplosion Proof, TEFC, Open Drip-Proof and Air motors provide durability and safety regardless of the environment.