Oil & Gas

The main advantages include:
- Compact and light weight
- Great for a wide range and changeable viscosities
- High efficiency (up to 98%)
- Cost effective
- Very low pulsation
- Limited self priming (seek advise)
- Low or high speed running
- High temperatures - over 300°C
‍

The main disadvantage include:
- Noisy
- Cannot be run dry
- Don't use with abrasive mediums

‍

• 40 PV - 30m head / 12l/s
• 65 QV - 31m head / 25l/s
• 100 RV - 34m head / 75l/s
• 150 SV - 43m head / 105l/s
• 200 TV - 36m head / 220l/s
• 250 TV - 31m head / 330l/s

For Pressures to 1,500 PSI

The RS is offered with Class 300 ANSI R.F. inlet flanges and Class 600 or 900 ANSI R.F. discharge flanges, depending on the pressures and number of stages involved. Hydraulic performance extends to 2,000 GPM and 3,400 ft. TDH, making it ideally suited for the most demanding industrial and process applications.

The RS design incorporates a product-lubricated, advanced composite material, sleeve-type radial bearing at the outboard (discharge) end. The thrust bearings are two matched angular contact ball bearings located at the inboard (suction) end of the pump. An optional outboard mechanical seal with an inboard radial ball bearing is also available. The RS has oil-lubricated ball bearings, which can be water cooled. Larger units can also be fan cooled.

The available materials of construction, from ductile iron to duplex stainless steel, offer combinations suitable for all applications from general water services to light abrasives and corrosive applications. Our proprietary advanced composite material, available for wear rings and interstage bushings, offers high-temperature performance, and exceptional resistance to wear and corrosion.

‍

Capacities range to 1000 GPM, depending on discharge head and speed of operation. Available in 6 sizes ranging from 1”-4”; standard materials of construction include All Iron, CD4MCu and Rubber Lined. The 855Series features an overhead v-belt drive arrangement as a standard, with options for close coupled or frame mounted drives. By utilizing either belt drive or variable frequency drive, performance characteristics can be fine-tuned to match most system requirements. Maintenance is simplified as the vertically split case maybe disassembled to expose the entire wetted area. Standard features include a rotatable discharge casing which allows flexibility in locating desired discharge flange orientation, packed stuffing box with seal water connections provided to insure lubrication and eliminate vacuum/air leakage and 2” diameter stuffing box bore on all units. Pumps come with discharge flanges dual drilled for both 150lb / PN 10 connections. 17-4pHstainless steel shafts are utilized to both strengthen the shaft and eliminate the need for shaft sleeves (duplex shafts with CD4MCu). Impellers are keyed to the shaft ,providing a secure fit and protection should momentary reverse rotation occur. The Swing-Out Mount is popular as an optional feature, allowing inspection of the pump or quick access to the tank interior.

Applications

The dosing pumps are designed for handling chemicals within the following applications, among others:

• Drinking water treatment
• Wastewater treatment
  
• Cooling water treatment
  
• Washing systems
• Process water treatment
• Chemical industry.

Features and benefits

• Precise and easy setting
  
• Unique technology
  
• Small number of variants will cover all needs
  
• Full pulse control
  
• Pulse batch control
  
• Internal timer batch control
  
• Analog 0/4-20 mA control
  
• Level control
  
• Fieldbus communication module.

‍

LCR iQ Features

User Input & Display

• Large 7" high definition, full color video display - High clarity and easy visibility
• Customizable home screen and delivery setup prompts - Streamline driver interface
• Full alpha-numeric keypad and arrow selection keys - Quick, intuitive navigation
• Instant on-board diagnostics and help screens - Quickly troubleshoot & resolve issues to minimize downtime
• Full screen active delivery mode - Largest readable digits in the industry, viewable from up to 100'
• Day/night mode and brightness adjustment - Operator can select preferred viewing mode for conditions
• Customizable printed tickets - Easily tailor ticket formats without software updates
• Transaction history logs store 10,000+ records - No more lost tickets; Easily access and print historical tickets
• Weights & measures historical audit log and event log - Search and download by date range or field
• Large LED back lit keypad - Easy to operate with gloved hands, easy to read in daylight or at night
• Remote control (E-Stop) compatible to third party systems - Seamless retrofit into existing systems
• 3rd party fleet automation connectivity and data management - Seamless retrofit into existing systems
• Toggle flow - Optimizes fuel flow rate without driver intervention in refined fuels delivery systems
• Wireless Printing - Operator can print from hand-held remote printer
• Connectable with hand held devices, etc via wifi and Bluetooth.
• Standard meter mount base - Drop-in retrofit for all conventionally mounted registers
• Panel mount enclosure option - For remote panel mounting of LCR.iQ®
• Preset delivery by volume or weight - Provides highest accuracy of fuel delivery to prevent over-fueling
• 4-Bolt even seal o-ring design - Water-tight, weather-proof seal protects internal components
• Die-cast aluminum housing - Chromate and powder coated for long term corrosion resistance.11 Conduit Ports (1/2" NPT) - To accommodate many I/O and control optionsMulti-point calibration up to 16 points - Maximize accuracy over entire flow range
• Internal telescoping hinges - Eliminates seizing and corrosion of external door hinges
• Serial accessibility to LCP data communication protocol - Compatible with major in-cab/back office systems
• Electronic temperature volume compensation - Available with optional probe and thermowell kit
• Waterproof, corrosion resistant and dust-proof - meets IP66 and UL Type 4X requirements

• CPE ANSI pumps are specifically designed to exceed the strictest energy regulations for all industries as well as the requirements of ANSI/ASME B73.1. With revolutionary hydraulics and high efficiency, they offer the lowest life cycle costs.
• API 610 / ISO 13709 international standard specifies requirements for overhung, between-bearings and vertically-suspended centrifugal pumps used in petroleum, petrochemical and gas industry process services.
• CPT chemical end suction single stage centrifugal pumps are used for demanding industrial applications to ensure process reliability, high efficiency and low operating costs. ANSI / ASME B73.1 standard covers centrifugal pumps of horizontal, end suction single stage, centerline discharge design, including dimensional interchangeability requirements and certain design features to facilitate installation and maintenance.

316 Stainless Steel or Hastelloy
Flow rates to 650gph(2460L/hr)
Differential Pressures to 250psi(17.2bar)
System Pressures to 500psi(34.5bar)
Temperatures to 350°F(176°C)

The 1000 Series is based on the proven internal gear principal and is enhanced in response from our OEM customers for a pump that offers advanced features which make installation easier. These side-ported pumps have the option to bolt SAE/DIN flanges onto them ensuring maximum flexibility on the porting arrangements. Our pump meets your technical requirements and is easily fitted into your system. Our manufacturing expertise and knowledge of applications enable us to provide you with an engineered solution and ensure satisfaction with post-sales service. We pride ourselves on properly servicing you with specification, installation, operation, and troubleshooting.  The pump was originally designed to meet and exceed the exacting requirements of the refrigeration compressor market.

Engineered to control, measure and dispense preset volumes of liquid from drums, IBC’s, plating tanks or any large storage vessel. The air systems are ideal for high frequency, continuous duty applications. The BCS can be used in an industry where batching, chemical packaging or dilution is required to be accurate and efficient. Simply dial in the desired volume, press ENTER and the BCS delivers a preset volume of liquid virtually hands-free.

Applications

• Chemical Packaging
• Water Treatment Chemicals
• Chemistry For Plating Tanks
• Chemical Delivery

Features

• Turbine Paddle Wheel Design
• Measures: Gallons, Liters, Cubic Meters
• Resettable Totalizer
• User Friendly “In Field” Calibration
• 7 Pre-Set Batches
• PP & PVDF Materials of Construction
• Relay Output Signal

‍

Models / Series

• Open Drip-Proof
• TEFC
• Explosion-Proof
• Air | 1/2 hp
• Air | 3/4 hp
• Air | Flange Mount
• TEFC | 3 Phase

‍

Models / Series

• Centrifugal | Polypropylene
• Centrifugal | Stainless Steel
• Centrifugal | CPVC
• Centrifugal | PVDF
• Centrifugal | Aluminum
• Progressive Cavity | Planetary Gear
• Progressive Cavity | Direct Drive

‍

Blackmer S Series pumps are available in four distinct lines, each having multiple model configurations and sizes: twin screw (WTG), twin screw with non-timing gear (NTG), multi-phase twin screw, and triple screw. Other features of Blackmer S Series pumps include compact design, ability to run dry for short periods, high suction lift and constant flow rates despite varying conditions. They are low noise and nearly pulsation-free with little fluid agitation, making them ideal for use with corrosive and non-corrosive, low or high viscosity, and clean or abrasive liquids.