Oil

For Pressures to 1,500 PSI

The RS is offered with Class 300 ANSI R.F. inlet flanges and Class 600 or 900 ANSI R.F. discharge flanges, depending on the pressures and number of stages involved. Hydraulic performance extends to 2,000 GPM and 3,400 ft. TDH, making it ideally suited for the most demanding industrial and process applications.

The RS design incorporates a product-lubricated, advanced composite material, sleeve-type radial bearing at the outboard (discharge) end. The thrust bearings are two matched angular contact ball bearings located at the inboard (suction) end of the pump. An optional outboard mechanical seal with an inboard radial ball bearing is also available. The RS has oil-lubricated ball bearings, which can be water cooled. Larger units can also be fan cooled.

The available materials of construction, from ductile iron to duplex stainless steel, offer combinations suitable for all applications from general water services to light abrasives and corrosive applications. Our proprietary advanced composite material, available for wear rings and interstage bushings, offers high-temperature performance, and exceptional resistance to wear and corrosion.

‍

• CPE ANSI pumps are specifically designed to exceed the strictest energy regulations for all industries as well as the requirements of ANSI/ASME B73.1. With revolutionary hydraulics and high efficiency, they offer the lowest life cycle costs.
• API 610 / ISO 13709 international standard specifies requirements for overhung, between-bearings and vertically-suspended centrifugal pumps used in petroleum, petrochemical and gas industry process services.
• CPT chemical end suction single stage centrifugal pumps are used for demanding industrial applications to ensure process reliability, high efficiency and low operating costs. ANSI / ASME B73.1 standard covers centrifugal pumps of horizontal, end suction single stage, centerline discharge design, including dimensional interchangeability requirements and certain design features to facilitate installation and maintenance.

Designed with fewer parts than competitive pumps, Graco’s air operated double diaphragm pumps features our stall-free, low pulsation air valve, which is externally accessible—ensuring rapid changeovers and minimum downtimes.

Graco’s electric double diaphragm pumps (EODD) are ideal for applications that require low pulsation and a smooth flow. Our energy efficient electric drive reduces energy consumption up to 5x compared to traditional air operated diaphragm pumps.

Each pump is ruggedly constructed to resist corrosion and deliver a long, trouble-free product life.

‍

The Graco diaphragm pumps come in a wide range of air operated and electric diaphragm pumps (ATEX models available). You can also choose from a extensive selection of materials to handle numerous applications, including corrosive and abrasive fluid transfer.

JDA GLOBAL LLC (est. 2011) serves as the world's largest & most experienced after-market diaphragm pump products provider. World class supply chain management, coupled with a proven track record in distribution development brings forth strong customer satisfaction. Linked with LOW COST, HIGH QUALITY products, rapid delivery and "easy to do business with" customer service, we strive for a "customer for life" strategy and fulfillment.

Nomad Diaphragm Pumps are interchangeable with their Wilden counterparts but are significantly more cost effective and excellent quality. This means that while being an extremely reliable alternative to Wilden, there is no need to spend time and money changing pipework in order to lock in the cost savings.

Backed by all American JDA Global you can find confidence in a five year limited warranty.

Nomad Diaphragm Pumps are available in four different body materials; aluminium, ductile iron, stainless steel and polypropylene with all major elastomers. They come in seven port sizes; 1/4", ½", 1", 1 ½" ", 2" 3" and 4". All are capable of self priming, dry running, solids handling and high pressures.

Sold worldwide, these pumps are suitable for a full spectrum of applications from mining and construction, oil, ceramic, resin and chemical transfer to sanitary such as food & beverage. AODD pumps are particularly suitable for pumping chemicals, petroleum, foods, beverage, cleaning solutions, slurry, waste water, adhesives, pharmaceuticals and higher viscosity fluids.

‍

API 610 / ISO 13709 international standard specifies requirements for overhung, between-bearings and vertically-suspended centrifugal pumps used in petroleum, petrochemical and gas industry process services.

CPE ANSI pumps are specifically designed to exceed the strictest energy regulations for all industries as well as the requirements of ASME B73.1. With revolutionary hydraulics and high efficiency, they offer the lowest life cycle costs.

CPT chemical end suction single stage centrifugal pumps are used for demanding industrial applications to ensure process reliability, high efficiency and low operating costs. ASME B73.1 standard covers centrifugal pumps of horizontal, end suction single stage, centerline discharge design, including dimensional interchangeability requirements and certain design features to facilitate installation and maintenance.

‍

• Cast Iron Housing Construction

• 30 Minute Duty Cycle

FEATURES

FR2410G

FR3210B

• UL/cUL Certified Motor (exception FR1614)

• Gasoline, Diesel, B20,E-15, and   Kerosene, Compatible

‍

• Port Size: 50mm tank adapter
• Max. Flow Rate: 76 litres per 100 strokes
• Construction Materials: Aluminium/Stainless Steel liner.
• Applications: Suitable for decanting of petrol, oil and approved fluids

‍

• Port Size: 6mm to 80mm
• Max. Flow Rate: 733 l/m
• Max. Discharge Pressure: 55 bar
• Max. Fluid Temperature: 80°C
• Construction Materials: Aluminium, Stainless Steel, Bronze, PPS.
• Applications: Suitable for alcoholic spirits, sauces, fruit juice, milk, water, chemicals, detergents, oils, fuel, paints.

‍

Commercial helicopter operators will appreciate the significant cost advantages in terms of the reduction in turbine cold starts occurring from the ability to safely refuel with rotors turning.  

Available Configurations:

   
• Curved or straight spout (other spout configurations available)
   
• Female ISO or female NPT inlet
   
• Varying ground cable lengths available

‍

Scully systems are the number one choice worldwide for overfill prevention, grounding, and vehicle identification safety at bottom- and top-loading terminals

• Control fills and eliminate spills of petroleum and liquid chemicals into tank trucks and rail tank cars
• Capable of monitoring tank trucks with up to eight compartments when equipped with two-wire sensors or 15 compartments when equipped with five-wire sensors
• Superior system compatibility and performance when connected to tank trucks or rail tank cars outfitted with Scully sensors

‍

The most advanced terminal overfill prevention and ground verification system available.

• The only control system that offers overfill prevention, static grounding, and vehicle identification all-in-one unit
• The ultimate in terminal loading safety with a patented design that continuously monitors the relay contacts—for petroleum and chemical loading racks
• Incorporates Dynacheck® Dynamic Self Checking® circuitry for overfill prevention, ensuring that every critical component is automatically and continuously checked for maximum loading safety
• This includes the control unit, wiring, and sensor circuitry, and should a fault be detected, it signals a loading shutdown to prevent product from overfilling
• Over 15 years of proven performance in the field—the number one choice worldwide

‍

Protect your fueling operations with a complete line of Scully Liquid Safety Systems

• No operator on top of the vehicle ensures reduced liabilities and lower insurance costs
• Hatch remains closed, eliminating potential environmental and safety hazards
• Replaces older mechanical jet level sensors or floats that can fail at any point with no detection
• Dynacheck® Self-Checking circuitry means your Scully overfill prevention system checks itself 30 times per second to prevent human error, and if any sensor or component failure is detected, it automatically shuts down the operation
• One connection does it all—overfill protection, static grounding, and Dead Man Control.
• An Audio Interface Module with alarm is available for applications such as U.S. Navy Refueler and Defueler operations where an audio alert is required

In some applications, a Scully IntelliCheck® onboard control unit is used to control functions such as advanced interface modules, and bottom loading or defueling shutdown controls. Vehicles can be outfitted with an independent dual level system (high & high/high). The high-level sensor is controlled at the fill stand by a Scully control unit. The high/high sensor can be installed as a secondary shut down method controlling the vehicle’s bottom loading valves. If the valve or pump fails to shut down fuel flow at the fill stand, the secondary vehicle system will take over and shut down the vehicle’s bottom loading valve. The U.S. Air Force has standardized on this system.

Vehicle Identification Systems, which communicate via the overfill system plug to the control unit at the fill stand, can also be used to prevent mixing of different fuel grades.

Scully aviation systems have been standard equipment on U.S. Navy refuelers and Air Force R-11 refuelers for many years and are also in use in the commercial aviation market.

‍

Corken offers several industrial sliding vane pumps for a wide range of vapor pressures, differential pressures, and viscosities. All industrial pumps are equipped with an adjustable internal relief valve and feature self-adjusting sliding vanes and vane drivers to improve pumping efficiency. And, maintenance is simple. Removing the pump cover gives full access to the rotor, cam, sideplates, seals, and bearings. Drive options include gear reducer, V-belt, and hydraulic.

Suitable liquids include but are not limited to aviation fuel, fuel oil, lube oil, solvents, and liquefied gases such as LPG, ammonia, and carbon dioxide.

‍

• Sustained Accuracy and Repeatability
• No Metal-to-Metal Contact within the measuring chamber
• Low Pressure Loss & Low Maintenance
• 3 PD Series available to support an extensive range of refined fuel and fluid applications
• Choice of Aluminum or Stainless Steel materials of construction
• Variety of system accessories available to provide our customers a single source for accuracy and reliabiliy when it comes to fuel measurement and data management

‍