Waste Water

Any type of fluid pump such as Air Operated Double Diaphragm, Metering, Hose, or Centrifugal pump will ultimately create uneven pulses in your system just due to its fluctuating nature.  However, over time this will quickly wear out the components of your pump as well as the overall system, often leading to sudden cracks in the pump or damage to the equipment.                    

A pulsation dampener is designed to absorb and give pressure when needed in order to smooth out the flow and reduce up to 99% of pulsation and shock in the system. Don’t wait until it’s too late; protect your system from the beginning.  Learn more about dampeners for any application:

Standard Pump, Inc. began manufacturing Drum Pumps in 1992 in Snellville, Georgia.

Over the next twenty-five years, we have expanded the product line to include Air-Operated Double Diaphragm pumps (AODD) as well as Metering Systems.  Our Fluid Handling Equipment serves the Chemical, Food, Beverage, Cosmetic, Pharmaceutical and Automotive industries in fifty-two countries.

Today, we continue our commitment to manufacturing high quality Fluid Handling Equipment in our modern ISO 9001 certified factory in Duluth, Ga.  All Standard Pump products adhere to stringent safety guidelines set for by agencies such as Underwriter’s Laboratories (UL), CSA, 3A, ETL and the FDA.

‍

The Grundfos CR vertical, multistage, centrifugal in-line pump family works for water supply, water treatment and almost any industrial solution – including those for high-pressure, hot, dangerous, flammable and aggressive liquids.

Now, the range has been upgraded with a new, more robust generation of CR pumps (CR 95, CR 125 and CR 155), offering an optimised hydraulic design for world-class energy efficiency.

Thanks to a small footprint, the pumps are also easier and less costly to install than comparable pumps.

The new CR pumps have been developed using simulation-driven design to perfect every single component and have been field-tested around the world, so you can install and operate the range with total confidence.

The CMB is the horizontal alternative

‍

High Pressure Pumps: Multistage Horizontal High-Pressure Centrifugal Pump.

Pump & Machinery Co Ltd is distributing All Prime pumps to many different waste water industries. They are high quality Solids-Handling Self-Priming Centrifugal Pumps that perform to very high standards. The All Prime Pumps range is very competitively priced and has rapidly gained market share in the USA and other parts of the world.

The All Prime pump range has been readily accepted in New Zealand, as it has been in the USA and other parts of the world, where it is considered a cost effective, quality pump achieving high standards of performance.

‍

Heavy duty cast Ni Al bronze & cast 316 stainless steel, self priming, centrifugal electric drive pumps with high pressure and flows available in a range of sizes from 1” through to 4”.  

‍

‍

The Unilift AP and Unilift AP Basic are submersible drainage pumps designed for both temporary/portable installation and permanent free-standing installation. These single-stage pumps are made mostly of stainless steel. All types are available in either single phase or three phase versions and for 50 or 60 Hz power supply.

The number in the type designation, e.g. AP12, indicates the spherical particle size that can pass through the pump.

All Unilift AP and AP Basic pumps are fitted with a plug for connection to the mains.

Unilift AP is a single stage pump with either semi-open impeller (AP12) or with vortex impeller (AP35 and AP50). All Unilift AP pumps are fitted with a stainless steel sleeve for cooling during operation. The strainer at the bottom prevents particles larger than the pump is designed for from entering the pump. The strainer is clipped onto the pump housing. All Unilift AP pumps can be supplied with or without float switch, for automatic or manual operation. Pumps with an ”A” in the type designation are fitted with a float switch. 3-phase versions have an additional starter box connected to the float switch. The outlet is positioned at the top of the pump and is available in Rp 1 1/2 to Rp 2.

An optional non-return flap valve can be fitted in the outlet in order to prevent backflow.

Unilift AP Basic pumps are single-stage pumps (AP35B, AP50B) with vortex impeller. All Unilift AP Basic pumps are made of stainless steel, with a composite baseplate. The Unilift AP Basic range is designed for submerged operation, either free-standing on the base plate or installed using an auto coupling. The pump inlet is designed to prevent to large particles from entering the pump. The base plate is clipped on by means of four clips hidden under the composite ring at top of the pump housing. The ring prevents dirt from sticking to the clips. All Unilift AP Basic pumps can be supplied with or without float switch, for automatic or manual operation. Pumps with an ”A” in the type designation are fitted with a float switch. The outlet is positioned at the side of the pump and is R 2.

‍

The SEG range of grinder pumps from Grundfos is specifically designed for pumping effluent and untreated sewage for small communities or sparsely populated areas with no sewer systems or where gravitation systems are unsuitable.

Pressurised systems are the perfect choice for transfer of effluent and sewage, and the SEG range combines cost-effective prices with maximum protection for the environment by facilitating the use of smaller pressure pipes for minimal investment costs.

The SEG range is designed to reduce energy consumption and to keep downtime costs to a minimum, while maintaining peak performance throughout the system life.

‍

KSB is one of the world's leading manufacturers of pumps and valves and also offers a comprehensive range of service activities. The company's products and services are used in process engineering and building services, water and waste water management, and in the energy and mining sectors.

The full range of KSB pumps is available through Pump & Machinery.